CarPlan Red Antifreeze & Coolant

CarPlan FSA005 Premium Red Antifreeze & Coolant

Not suitable for classic or vintage vehicles.

CarPlan Premium Red Antifreeze & Coolant is a superior quality, Mono ethylene glycol based antifreeze & coolant concentrate incorporating the latest in Organic Acid Technology (OAT).

CarPlan Premium Red Antifreeze & Coolant conforms to BS6580 (2010) and contains Bitrex to help prevent ingestion

CarPlan Premium Red Antifreeze & Coolant uses a synthetic process and additive package which offers superior corrosion resistance over extended service periods, which can also be left in the system for up to a maximum of 5 years whilst offering protection down to -36°C.

For general UK conditions use a 25% or 3:1 solution (3 parts water to 1 part antifreeze).

For severe UK winter conditions use 33% or 2:1 solution (2 parts water to 1 part antifreeze).

For optimum protection down to -36°C use a 50% or 1:1 solution (1 part water to 1 part antifreeze).

Directions For Use:

Drain and flush the cooling system with clean water.

If sludge is evident use a radiator flush for a complete cooling system preparation.

Check all hoses, clips and joints for leakage and tighten or replace where necessary.

Remove radiator or expansion tank cap and partly fill the radiator system with clean water.

Add antifreeze to give the level of protection required (refer to vehicle handbook for total volume of the cooling system).

Replace cap.

Run engine until it reaches normal operating temperature to remove any air locks.

Switch off engine and allow to cool.

Check for and correct any leaks.

Top up with water if necessary.