Dayco "White Belt" Timing Belt Kits

Dayco "White Belt" Timing Belt Kits

Dayco, a leading engine products and drive systems supplier for the automotive, industrial and aftermarket industries, supplies a number of important, original equipment (OE) components, to vehicle manufacturers (VMs) across Europe and beyond.

In addition, as an established power transmission system expert, it is a preferred partner for many VMs and its considerable expertise has enabled it to develop highly efficient solutions for their many and varied needs, particularly as they try to meet the emissions targets demanded by governments around the world.

Among these many product developments is the Dayco High Tenacity (HT) or ‘white’ belt, which, with its PTFE film on its inner teeth and fibreglass core, has become the mainstay timing belt for many engine variants used for multiple applications by numerous VMs.

When faced with a timing belt replacement, the only way to replicate the quality of the OE belt is to fit another white belt, which is only possible by fitting Dayco. So, for the peace-of-mind of the owner, as well as the most profitable result for the workshop, a full timing drive system replacement is the only option.

Dayco’s commitment is to provide technicians with timing belt kits that, in addition to the normal belts, tensioners and idlers, also contain all the other components that the VM specifies need to be replaced during the vehicle’s scheduled change interval. This not only helps the technicians undertaking the work, it also provides peace-of-mind for workshops because a full system
overhaul has been able to be carried out.

Among these additional items are crankshaft pulley bolts, which when specified for replacement is usually because they are stretch bolts and therefore, for safety reasons, must not be reused. To provide the greatest level of transparency, Dayco distinguishes these kits with the letter ‘K’ at the end of the part number.

“In order for them to complete a full and thorough repair, it is vital that technicians replace all the components and ancillary items such as nuts, bolts, studs and circlips that the manufacturer has stipulated must be changed at the designated service
interval,” explains Dayco’s National Sales Manager, Steve Carolan.

“Although without access to the manufacturer’s service and repair information, it is sometimes difficult for technicians to find the precise details of which additional items this requirement applies to, we have made things considerably easier for them by including all the items that need to be replaced in the kit. So, the message is: ‘If it’s in the box, it must be changed’.

“OE derived components provide workshops with a number of tangible benefits from premium quality and fit first time installation, to increased durability and reduced warranty claims. In addition however, when they fit an HT water pump/timing belt kit, Dayco can also provide them with an even greater level of reassurance by offering the opportunity to extend the existing two-year warranty by a further year.

“The Long Life +1 year warranty is a perfect example of how Dayco’s technology can provide workshops with a ‘real-world’ competitive advantage over those fitting other brands. It also gives the motorist a level of protection that cannot often be matched, even by the franchised dealer.

“So, the combination of guaranteed OE quality products and product support such as the Long Life +1 year warranty, makes Dayco a great choice for workshops.”

Technical Tips:
There are numerous tips that Dayco recommends technicians bear in mind to promote best practice when replacing primary and auxiliary drive components, amongst others, these include:

• ensure the engine is cool, ideally not run for at least four hours
• the working area air temperature should be around 20°C, the same as the parts to be installed
• disconnect the battery
• if needed, remove the spark plugs
• only rotate the engine in its normal operating direction
• ensure that replacement belts are treated with respect and not handled with greasy hands, crimped or otherwise damaged before installation
• when fitting a replacement water pump, sealing compound should only be used when the gasket is not included, otherwise just wet the mating surfaces and the supplied gasket with coolant
• as Dayco kits contain all the components that VMs state must be changed in accordance with the specific service procedure, technicians must fit all the components supplied in the relevant Dayco timing or auxiliary belt kit, during the replacement process
• specific torque sequences and values must be followed

In short, the basic principle for technicians is to simply follow the VM’s instructions, without adding ‘just in case’ additions like lots of sealer or thread adhesive etc. In other words, don’t improvise and fit it the way they think is best, just follow the VM directive, which is best.

To purchase Dayco Timing Belt kits from YMF Car Parts - Click Here Dayco Timing Belt Kits